Contactarnos
Teléfono: +86-311-66578468
Fax: +86-311-80980084
Buzón: anniewang@zoyals.com
Teléfono: +86-18032484853 (processing Mo.-Fr. 8-18 Uhr)
How to Remove the Chain Fence Fabric
1.Start with an end or corner post. The post in this position is generally wider in diameter than the other posts. The fence fabric will be attached to it by a thin, flat piece of metal called a tension bar that is woven through the fence fabric and attached by clamps to the post.
2. Remove the clamps holding the fence fabric to the post. The clamps are generally attached with a bolt and nut. Loosen the nut with a wrench and pull the bolt out. Pull the clamps off the fence post. The fence will slacken, but shouldn't fall.
3. Pull out the tension bar. Weave the metal bar out from the chain link. Save your hardware and the metal bar in a safe place, keeping the ground clear.
4. Measure out a section to remove.
5. Remove the fence ties a few at a time from your marked section.
6. Lay the fence fabric on the ground, or roll as you go.
7. Break the fence when you get to the end of your marked section.
8. Roll and tie the removed section.
9. Repeat until the fence fabric is removed.
